篇一：建筑节能外墙保温技术及节能材料毕业论文中英文资料对照外文翻译文献综述
外墙保温技术及节能材料
中英文资料对照外文翻译文献综述
文献翻译
On the external wall insulation technology and energy saving
materials
[ Abstract ] as the energy conservation and protect environment requirements of the continuous improvement, building maintenance structure heat preservation technology is also increasing, especially in exterior wall insulation technology has made great progress, and become an important building energy saving technology. At present, the building is often used in external wall insulation are mainly within the insulation, insulation and other methods, according to the development of new technologies, new energy-saving materials should be developed and utilized, so as to really implement building energy conservation.
[ Key words ] external wall insulation building materials energy-saving building Building energy saving is the implementation of the national environmental protection and energy conservation policy is the main content, it is to carry out the sustainable development of the national economy important component. The national Ministry of construction in1995 promulgated the" rules for the implementation of city building energy saving" and other documents, the" energy conservation design standard for residential buildings ' partial '" JGJ26-95as a mandatory standard, at the same time, the Ministry of construction and was released in October 1, 2000seventy-sixth called" regulation of civil building energy saving", do not conform to the standard of energy saving project, shall not approved for construction.
In such a series of energy-saving policies, regulations, standards and mandatory guidance, China's energy-saving housing construction work unceasingly thorough, continuously improve the energy efficiency standards, the introduction of the development of many new energy-saving technology and materials, vigorously promote the use of residential buildings. But our country's current level of building energy conservation, but also far lower than developed countries, China's building energy consumption per unit area is still a climate similar to the developed countries 3
times to 5 times. Construction energy conservation is China's construction industry is an important task.
One, external wall thermal insulation technology
Energy saving thermal insulation wall construction technology mainly divided into exterior wall internal insulation and exterior wall insulation in two categories.
1internal insulation technology and its characteristics. Within the external wall insulation construction, in the exterior wall structure with internal heat insulation layer. Thermal insulation in the construction speed is fast, convenient and flexible operation, can ensure the construction progress. Internal insulation application time is long, the technology is mature, construction technology and inspection standard is perfect. In 2001the construction of external wall insulation in about 90% of the engineering application of internal insulation technology. To be popularized in large area of internal insulation technology : reinforced gypsum composite polystyrene insulation board, polymer mortar composite polystyrene insulation board, reinforced cement composite polystyrene insulation panels, interior wall decoration with polystyrene board plastering gypsum and wipe with particles of polystyrene insulation slurry and anti-crack mortar is pressed into the mesh approach.
But the internal insulation will occupy the area of use," bridge" is not easy to solve, easy to crack, but also affects the construction speed, influence dweller decoration two, and the inner wall hanging and fixing it easy to break the internal insulation structure. Internal insulation technology of irrationality, it would be replaced by external insulation.
2external insulation technology and its characteristics. External insulation is currently promoting a building energy-saving insulation technology. The outer and inner thermal insulation, reasonable technology, has its obvious advantages, the use of the same specification, the same size and insulation material, insulation than the inner heat preservation effect is good. External thermal insulation technology applies not only to new construction, also apply to the transformation of old buildings, applicable to a wide range, with high technical content; external insulation package in the main structure of the lateral, to protect the main structure, prolongs the service life of buildings; effectively reduces the thermal bridges in building construction, increase the construction of effective space; while eliminating condensation, improve the living comfort.
(1) external external thermal insulation external insulation materials of rock ( ore) cotton, glass cotton
Mat, polystyrene foam board ( referred to as polystyrene board, EPS, XPS ), ceramisite concrete composite polystyrene insulation board, stone decorative wire mesh frame sandwich wallboard. The polystyrene board has excellent physical
properties and cheap cost, already all over the world within the external wall insulation plug technology is widely used in. The plug-in technology is the use of adhesive mortar or special fasteners, thermal insulation material affixed hanging on the wall, then wipe the anti-cracking mortar, press glass fiber grid cloth to form a protective layer, finally combined with decorative surface. This type of external insulation installation is time-consuming, difficult construction, and the construction period to be occupied dominant, main body after the inspection to construction. In the high-rise construction, the safety of construction personnel is not easy to be guaranteed.
(2) polystyrene plate wall of a casting molding
The technique is in the concrete frame shear wall system the polyphenyl board built in building templates, in the gating of the wall outside, then pouring the concrete, concrete and polystyrene board in a casting molding for composite wall. The technology to solve the external insulation problems, its advantage is very obvious. Because the outer wall body with insulation layer of a survival, efficiency, significantly shortening the construction period, and the construction personnel safety assured. But when construction in winter, polystyrene board insulation effect, can reduce the peripheral wall heat preservation measures. But in the concrete to uniform, continuous casting, or because the concrete lateral pressure effect will cause the polystyrene board in Chaimo after deformation and staggered stubble, affect the order of the construction.
All kinds of insulation technology and advantages
1, expanded polystyrene board and thin plastering and reinforced by glass fiber approach and advantages
It is currently in use in our country most one kind of external insulation wall, wherein the polystyrene board in the primary wall fixed in one of three ways:1) by bonding mortar fixed;2) using a mechanical fixture fixed;3) more than two kinds of fixed combination. This approach has the following advantages:1) because it is in Europe and the United States have been in use for nearly thirty years, in the United States have built high up to 44 layers, therefore. This technology already formed a system, the bonding layer, heat-insulating layer and facing layer supporting the use, more mature technical documents;2) due to the expanded polystyrene insulation materials, the price is very expensive, so that the whole system of moderate price. Convenient user acceptance;3) no complex construction technology, construction unit after a brief training, can grasp the essentials for construction, technology promotion;4) it set insulation, waterproofing and decoration function in a body, has the advantages of multiple functions;5) the whole system has good weatherability, good waterproof and water vapor permeability;6) a variety of color and texture of the
surface coating for selection, and the entire system supporting the use of. At present. This approach in Beijing, Northeast China and other places has been widely applied, Beijing Yu Garden, Wolong garden, the Ministry of construction of C eight, C ten buildings transformation and many other engineering, have adopted this approach. However, due to expansion polystyrene against termites, termite in areas not available; due to the construction of environmental temperature of 4 degrees, not suitable for winter construction.
In 2, the extruded polystyrene for external thermal insulation wall
Extruded polystyrene is in recent years developed a new type of thermal insulation material. At present, extruded polystyrene and the tea layer wall fixed mode mainly adopts mechanical fasteners. The material has the advantages that:1) extruded polystyrene with dense surface and inner layer of the obturator structure. Its thermal conductivity is much lower than the same thickness of expanded polystyrene, therefore has a better thermal insulation properties of expanded polystyrene. In the same building, its thickness can be less than other types of insulation material;2) due to the inner layer of the [ knife hole structure. So it has good humidity resistance, in the humid environment, can keep good thermal insulation properties;3) suitable for cold insulation on the special requirements of the building, and can also be used for exterior wall facing material for brick or stone building,4) as a result of extruded polystyrene and the base wall fixing mode of soil using mechanical fastener. In winter the normal construction. At present. In Beijing, the river runs and other regions have to use this material for outer wall external thermal insulation construction, such as the Beijing New Oriental Plaza, Bank of China and other large public buildings. But the extruded polystyrene price is on the high side, thus is suitable for higher grade of the building. The construction technology and node structure needs to be further perfected.
The 3single side steel mesh polystyrene board with the exterior wall external insulation
This is developed in recent years, used for cast-in-place concrete construction of external wall insulation system, a kind of liu. It has the following advantages:1) this system in the construction of. The steel mesh polystyrene board is arranged to pouring wall inside an external mold, external insulation board and the wall a survival, after stripping the insulation board and the wall be made one, thus saving manpower, time and cost of installation;2) selection of steel mesh polystyrene plate, light weight, easy construction;3) construction easy to master. Winter construction of polystyrene board as usual;4) the lateral hanging wire, finishes available tiles. At present, this system is mainly used for cast-in-place concrete, high-rise residential, its construction, installation technology has yet to be further improved.
A 4 insulation paste material for exterior wall thermal insulation
In recent years, insulation paste is also beginning to be used in building outer wall heat preservation. The utility model has the advantages of:1) insulation paste adhesive layer, insulating layer and the decorative layer has formed a system, for supporting the use of;2) thermal insulation mortar for exterior wall thermal insulation, the basic wall roughness requirement is not high, easy in the shape of the basal wall construction;3) comparison of the construction process is simple, the operation easy to master;4) some insulation slurry material used in recycling of waste polystyrene granule as aggregate, energy saving, is beneficial to protect environment;5) can be used to repair the wall plastering surface cracks. At present, Beijing has many high-rise building exterior insulation with thermal paste, such as modern literature museum. However, insulation paste exterior wall external insulation node structure, construction process has yet to be further improved.
Above a few kinds of external wall thermal insulation technology, due to the adoption of the materials and construction technology are different, so their applicable scope are not the same. In use. Should be according to the design of construction cost, geographic location and other factors to choose.
In two, the external wall thermal insulation energy-saving materials
Energy saving materials belonging to the thermal insulation materials. Insulation material is used for building or thermal equipment, heat transfer impedance material or material complex, including(本文来自：wwW.xIaocAofanwEn.coM 小草 范文 网:建筑节能英语论文) both insulation materials, including cold insulation materials. Insulation material sense, on one hand is to satisfy the architectural space or thermal equipment, thermal environment, on the other hand, in order to save energy. With the worldwide energy shortage, thermal insulation material in energy-saving aspects of the meaning is more and more important. Only the general residents of heating air conditioning, through the use of thermal insulation building materials, which can be the basis of the existing energy-saving 50% ~80%. According to the Japanese energy-saving practice proved, each using1 tons of insulating material, can save coal3 tons / year, the energy-saving efficiency is10 times the cost of production. Thus, in some countries, the thermal insulation material as following coal, petroleum, natural gas, nuclear power after the fifth big" energy".
The 1insulation material performance. Adiabatic, is to maximize heat transfer impedance, so the requirement of adiabatic material must has great thermal resistance and low thermal conductivity.
From material composition, organic polymer thermal conductivity than the inorganic non-metallic material; thermal conductivity than the metallic material; gaseous material thermal conductivity less than the liquid material, the liquid material is less than solid. So when conditions permit, should try to use the organic polymer materials
篇二：建筑节能论文
建
筑
节
能
项
目
论文
姓名：陈 凤 英
学校：重庆电子工程职业学院
专业：楼宇智能化工程技术
专业老师：曹 保 山
对绿色建筑设计与节能技术探讨
（陈 凤 英）
摘要：随着建筑市场经济的发展，环境的承载能力成为衡量发展潜力的主要指标。为实现可持续发展,创造与自然和谐的人居环境,提供健康、舒适、活动空间,节俭使用有限资源与能源的绿色建筑,将逐渐成为人们的共识。本文就绿色建筑设计与节能技术进行了探讨。
关键词：绿色建筑；设计原则；节能技术
引言：
随着时代不断前进,从低能耗建筑到零能耗建筑;从建成环境影响到全寿命周期评价;从形体环境到人居环境；发展正经历着前进方向上根本性的变革。绿色建筑是将可持续发展观引入建筑设计的结果，要实现绿色建筑设计，设计师不仅需要以可持续发展的思想来反思传统设计理念，还需要掌握多层次、多专业、多学科的整体设计模式。
一．绿色建筑的内涵
关于绿色建筑的定义和内容，学术界尚无完全一致的意见，但世界各国专家、学者的基本观点是相同的：在全寿命周期内，绿色建筑将消耗最少的能源和资源，对环境和生态产生最小的影响，同时为居住和使用者提供健康舒适的工作、居住和活动空间。可见绿色建筑是实现“人、建筑、自然”三者和谐统一的重要途径，也是我国实施21世纪可持续发展战略的重要组成部分。在绿色建筑诸多方面的特征中降低能源消耗便是最重要的特征之一。
1．建筑与生态
近年来，我国十分重视可持续发展观，尤其针对保护环境、节约能源和减少污染等方面制定和颁布了一系列法规，并组织研究、开发和应用再生资源(如太阳能、地热能、风能、水能、生物能)及新型节能材料等许多新技术、新产品。开展了住宅性能认定、生态住宅技术评估、健康住宅建设技术要点和居住区环境景观设计导则等工作，并取得明显成效。
2．建筑与环境建筑设计要充分考虑周围环境，建筑的构造、色彩、风格等均须结合当地习俗、技术和环境等条件，使建筑成为整个环境中的一个有机组成部分。建筑设计应从“物质环境、生态环境、社会环境和艺术环境“等方面综合思考，树立“遵循自然，回归自然“的意向。处理好建筑与生态环境的相互关系，遵循生态平衡观点和整体有序、循环再生原则，注重社会环境和艺术环境的再造。
3．建筑与节能
绿色建筑作为活的有机体，其外部围护结构如同人的皮肤一样，维持各种生存所必须的功能，室内外各种物质、能量等的交换均由渗透性的“皮肤”进行，以便维持健康、舒适的室内生存环境质量。因此，绿色建筑的节能技术尤其重要。
二．绿色建筑设计理念
1.绿色建筑与可持续发展
建筑是人类改变和适应周围环境的一种开发行为，建筑行为包含自然资源的消耗、改变和转化，显然这些行为在各方面都对环境造成影响，也将影响人类的可持续发展。
“绿色”是自然、生态、生命与活力的象征,它是表征人类与自然和谐共处、协调发展的文化，贴切而直观地表达可持续发展的概念和内涵。“绿色建筑”的产生和发展,是将绿色思想引入建筑领域的结果，这是国际建筑界对人类可持续发展战略所采取的积极回应，也必将成为未来建筑的主导趋势。
2.绿色建筑设计基本原则
绿色建筑需要人类以可持续发展的思想反思传统的建筑理念。理性设计的思维方式和科学程序的把握，是提高绿色建筑环境效益、社会效益和经济效益的基本保证。与传统建筑相比，绿色建筑应特别遵循以下基本原则：
(1)关注建筑的全寿命周期
建筑从最初的规划设计到随后的建造、运行、改造及至最终拆除，形成了一个全寿命周期。若考虑到建筑的构成材料，这一周期还应前溯至原材料的开采、运输和加工过程，向后追溯到建筑废弃、拆毁后的垃圾处理等全过程。关注建筑的全寿命周期就意味着,不仅要在规划设计阶段充分考虑并利用环境因素，还要确保施工过程对环境的影响降至最低，且在运行阶段能为人们提供健康,舒适低耗无害的空间，并将拆除过程对环境的危害降到最低。
(2)适应自然条件、保护自然环境
建筑设计应充分利用场地周边的自然条件,保留和利用地形、地貌、植被和自然水系，保持历史文化与景观的连续性；充分考虑当地气候特征的生态环境,建筑风格、规模与周围环境保持协调；应尽可能减少对自然环境的负面影响，如减少有害气体、废弃物的排放，减少对生态环境的破坏。
(3)创建健康、舒适的环境
绿色建筑应合理考虑使用者的需求，努力创造优美、和谐的环境；提高建筑室内舒适度，改善室内环境质量；保障安全，降低环境污染，同时为人们提高工作效率创造条件。
(4)加强资源节约与综合利用
绿色建筑应优化设计和管理，选择适用的技术、材料和产品；合理利用并优化资源配置，减少对资源的占有和消耗；最大限度提高资源、能源和原材料的利用效率，积极促进资源的综合利用；延长建筑物整体使用寿命，增强其性能及适应性。
3．建筑节能
降低能源消耗是绿色建筑最重要的特征之一。建筑节能是指建筑物规划、设计、新建(改建、扩建)、改造和使用过程中，执行建筑节能标准，采用节能型建筑技术、工艺、设备、材料和产品，提高保温隔热性能和采暖供热、空调制冷热系统效率，加强建筑物用能系统的运行管理，利用可再生能源，在保证建筑物室内环境质量的前提下，减少采暖供热、空调制冷，控制照明、热水供应的能耗。 三绿色建筑节能技术应用
1．建筑设计
合理的建筑设计是降低建筑使用过程中的能耗的重要前提条件。如当一栋建筑的功能、规模、场地确定后，建筑的朝向和外形会在很大程度上影响建筑能耗。一般认为，建筑体形系数小，单位建筑面积对应的外表面积就小，这样有利于降低采暖空调系统的负荷。其实，这种认识只在一定程度上是正确的。采暖空调系统的负荷来自室内外三部分，一是室内外的温差和太阳辐射传热，二是室内人员设备、照明产生的热量，三是向室内提供新鲜空气所需的能耗，其中前两部分的负荷，有时是相互叠加，有时又相互抵消。
2．建筑围护结构
建筑围护结构热工性能的优劣，是直接影响建筑使用能耗大小的重要因素。我国根据一月份和七月份的平均气温，划分严寒地区、寒冷地区、夏热冬冷地区、夏热冬暖地区和温和地区五个不同的建筑气候区，各地的气候差异很大，建筑围护结构应与建筑所处环境相适应。在严寒地区，建筑围护结构的保温性能是一项非常重要的指标，在墙体的外面增加一层保温材料是必要和非常有效的，且在一个合理的厚度范围内，保温层越厚，热工性能就越优越。而在夏热冬冷地区，建筑围护结构既要考虑冬季保温性能又要考虑夏季隔热性能，而这两者有时又会产生矛盾。
近年来，在建筑围护结构中，玻璃的使用面积越来越大。从绿色建筑角度考虑，透明的围护结构可以增加室内采光及冬季白天的太阳辐射量。但基于目前的技术发展条件，在一个合理的价格范围内，透明围护结构的热阻还是远远小于非透明围护结构的，更何况直接进入室内的太阳辐射在夏季常是空调系统的主要负荷，透明部分的外侧必须设有效的遮阳(最好是卷帘、百叶窗之类的活动遮阳)，以降低进入室内的太阳辐射量。由于透明围护结构的热工性能比非透明围护结构差，因此从节能角度出发，控制透明围护结构的大面积使用还是很有必要的。
3．室内环境控制技术
室内环境控制包括自然通风利用、自然光利用、空气处理系统等，其中暖通空调系统的技术应用最为重要。各类空调系统的能效存在较大的差异，建筑内部空调的合理分区对运行能耗的影响也很大，系统的科学运行管理对实际节能与否有相当重要的影响。
公共建筑暖通空调系统的能耗至少占建筑总能耗的50％以上，优化系统设计是节能的前提，系统的自动控制则是节能成败的关键。目前，暖通空调系统基本上采用集散控制技术，系统节能效率达10％～30％。
4．可再生能源应用技术
(1)太阳能光伏发电系统
太阳能属可再生能源，其最大优点是减少污染、保护生态环境。独立运行的太阳能光伏发电系统由太阳能电池板、控制器、蓄电池和逆变器组成，若并网运行，则无需蓄电池组。我国年均太阳能辐射量为5000WJ，年均日照时间为2200h，资源相当丰富。目前，太阳能光伏发电系统应用场所主要包括建筑物部分用电设备、环境照明(如庭院灯、草坪灯等)、道路照明、体育场照明等，随系统造价的降低，太阳能光伏发电系统的应用场所会越来越多。
(2)太阳能热水系统
随人们生活水平的提高，热水供应逐渐成为住宅建筑必须具备的功能，热水能耗也会越来越大，利用太阳能提供生活热水应是符合绿色建筑原则的。在住宅建筑中普及太阳能热水供应的最大障碍还在于太阳能热水器与建筑的一体化时，
只有当太阳能利用与建筑设计真正一体化，才能实现完全意义上的太阳能热水供应。太阳能屋顶应成为绿色建筑、尤其是绿色住宅建筑的一项重要措施。
5．建筑智能化系统
绿色建筑与智能建筑的共同点是建筑节能与环境控制。智能建筑(lB)是以建筑为平台，兼备建筑设备、办公自动化及通信网络系统，集结构、系统、服务、管理及它们间的最优化组合，向人们提供安全、高效、舒适、便利的建筑环境。建筑设备自动化系统(BAS)，将建筑物、建筑群内的电力、照明、空调、给排水、防灾、保安、车库管理等设备或系统构成综合系统，以便集中监视、控制和管理。系统显著的功能就是建筑节能与环境控制。
6．照明技术
照明也是建筑的耗能大项，在商业建筑中，照明能耗可占总能耗的20％～30％。照明不仅本身消耗能量，在有空调降温需求的场合，照明能耗还增大了空调系统供冷的需求。在绿色建筑中，可通过采用昼光照明、先进的照明技术和高效合理的照明设计来降低照明能耗。
昼光照明是“绿色”的照明方式，不仅降低能耗，还可起到降低供电峰值的作用。在大体量建筑中，房间进深通常都很大，利用一些折光板和反射天花板就能将光线引入房间内部，减少白天照明的需求。昼光资源的利用作为一项专门的课题，在绿色建筑中有很大的舞台。
照明技术的发展为照明节能提供技术支撑。为满足同样的照度要求，高光效的光源和灯具比普通光源和灯具消耗的电能要低得多。另外，从建筑设计角度应对降低照明能耗作出强制性规定。我国新版《建筑照明设计标准》规定了各类房间照明功率密度(LPD)限值，就是要在设计环节控制过度照明的发生。结束语
“绿色建筑”的提出，给建筑设计及技术应用带来理念上的变革。在创造适合人们生活、工作和开展其他社会活动场所的同时，尽可能提高资源利用率、减少环境污染，是建筑科技工作者一项光荣而艰巨的任务，也是我们应该承担的社会责任。
篇三：《建筑节能》论文
我们的生活离不开建筑，随着时代的发展，建筑所代表的文
化内涵也在不断发展，人们对建筑物的要求也在不断提高。建筑
不再仅仅是一个供人居住、进行活动的场所。 随着环境的不断恶化，自然资源的锐减，绿色节能的理念越
来越被人们摆上桌面来，其中就包括了绿色节能建筑。绿色建筑
标志着建筑观念的更新，以及建筑节能与保护地球环境的密不可
分的关系。一般而言，绿色建筑也可称作生态可持续性建筑，即
在不损害基本生态环境的前提下，使建筑空间环境得以长时期满
足人类健康地从事社会和经济活动的需要。目前，对绿色节能建
筑得到普遍认同的定义是指，为人们提供健康、舒适、安全的居
住、工作和活动的空间，同时在建筑全生命周期中实现高效率地
利用资源、最低限度地影响环境的建筑物。其基本内涵可归纳为：
减轻建筑对环境的负荷，即节约能源及资源
人类对于建筑的需求，经历了掩蔽一舒适建筑一健康建筑一
绿色建筑这样四个阶段，第一阶段是低能耗甚至无能耗的阶段，
第二和第三阶段是高耗能的阶段，第四阶段则是高能量效率、大
量利用可再生能源和未利用能源的阶段。在世界建筑发展的大潮
流中，建筑节能是建筑技术进步的一个重大标志，也是建筑界实
施可持续发作现状人手，把握建筑节能工作中存在的问题，并设
法加以解决。
绿色建筑设计理念包括以下几个方面： ①节约资源 在建筑设计、建造和建筑材料的选择中，均考
虑资源的合理使用和处置。要减少资源的使用，力求使资源可再
生利用。节约水资源，包括绿化的节约用水。
②节约能源 充分利用太阳能，采用节能的建筑围护结构以
及采暖和空调，减少采暖和空调的使用。根据自然通风的原理设
置风冷系统，使建筑能够有效地利用夏季的主导风向。建筑采用
适应当地气候条件的平面形式及总体布局。
③回归自然 绿色建筑外部要强调与周边环境相融合，和谐
一致、动静互补，做到保护自然生态环境。
舒适和健康的生活环境：建筑内部不使用对人体有害的建筑
材料和装修材料。室内空气清新，温、湿度适当，使居住者感觉
良好，身心健康。
绿色建筑的建造特点包括：对建筑的地理条件有明确的要求，
土壤中不存在有毒、有害物质，地温适宜，地下水纯净，地磁适
中。
绿色建筑应尽量采用天然材料。建筑中采用的木材、树皮、
竹材、石块、石灰、油漆等，要经过检验处理，确保对人体无害。
绿色建筑还要根据地理条件，设置太阳能采暖、热水、发电及风力发
电装置，以充分利用环境提供的天然可再生能源。
一．绿色节能建筑技术在超高层建筑中的应用案例
——广州“珠江城”案例分析
二．什么是“道”？
“有物混成，先天地生，寂兮廖兮，独立而不改，周行而不殆，
可为天下母，吾不知其名，字之曰道，强为名曰大。” ——老子
三．绿色超高层建筑的定义
在建筑全寿命周期内，比常规超高层建筑能耗显著降低、室内环
境质量显著提高、对周围环境影响显著下降、高效稳定运行的低碳和
可持续发展的超高层建筑。
可以看出，绿色超高层建筑无论从设计、施工、还是运营角度都
比普通超高层建筑效果好。因此发展绿色超高层建筑真正能够达到绿色、生态、可持续发展。
“珠江城大厦”简介
设计者：SOM
结构：钢框架-钢筋混凝土核
心筒
总高度：309.65米
最高楼层：289.95米
楼层数：71层
建筑面积：204386.00平方米 世界排名：建筑高度全世界
排名第51 位
设计理念： “天人合一”
四．外围护结构
1.、围护结构节能设计——双层智能型幕墙与日光控制
双层智能型幕墙
“珠江城”项目采用300窄腔“龛式”内呼吸连遮阳百叶双层智能幕墙。
一方面，空腔内遮阳百叶可根据气候与天气条件的变化进行统一智能控制调节角度与高度，实现将自然光引入办公室深处同时消除临窗外区的高辐射与眩光带给人的不适感，并节省人工照明用电量；第二方面，幕墙内呼吸动力系统配合外区冷梁设计可根据室外环境变化